Cigar Forums banner
wts or wtt
1-19 of 47 Results
  1. (WTS) Non-cigar Related Items
    1 month old Netgear Wireless ADSL2+ Modem Router. This looks and performs exactly as new. The only reason I am selling it is because I had to switch internet services and all of my new equipment was provided to me so now I have this as extra and don't need it. I just bought it a month ago...
  2. (WTS) Non-cigar Related Items
    I have two NIB Linksys E4200 N Routers that are usually $130-$180 retail. Looking for $100 shipped within the CUN or fair cigar trades. Thank you Derek Linksys E4200 - Maximum Performance Wireless N Router - Cisco Home Products Store
  3. Retailer/For Profit Sales Forum
    It's been a while since I had tools on hand so here there are… Here is a little bit about the tools I make.... All my Draw Tools are made out of exotic hardwoods. 3 inch handles with a 4 inch steel rods with 2 flute cuts to help remove tobacco as well, for a total of 7 inches. This way...
  4. (WTS) Non-cigar Related Items
    This new section of PUFF has been added so that the WTB/WTS/WTT for cigars section can stay free for cigars and cigar paraphernalia exclusively. Please read the following rules before posting in this section. Important: 90 Days and 100 Post Rule You must have been a member of Puff.com for at...
  5. Retailer/For Profit Sales Forum
    Ok here are my latest offerings….. A little about the tools I make.... All my Draw Tools are made out of exotic hardwoods. 3 inch handles with a 4 inch steel rods with 2 flute cuts to help remove tobacco as well, for a total of 7 inches. This way they will fit in a cigar caddy… $25 ea...
  6. Retailer/For Profit Sales Forum
    It's been a while since I made any of these.... I recently moved and just got all my workshop all set..... here is my latest batch... Here is a little about the tools I make.... All my Draw Tools are made out of exotic hardwoods. 3 inch handles with a 4 inch steel rods with 2 flute cuts to...
  7. Retailer/For Profit Sales Forum
    A little about the tools I make.... All my Draw Tools are made out of exotic hardwoods. 3 inch handles with a 4 inch steel rods with 2 flute cuts to help remove tobacco as well, for a total of 7 inches. This way they will fit in a cigar caddy… $25 ea. shipped your choice.... I take PP....pls...
  8. Retailer/For Profit Sales Forum
    Here is my latest round of Pipe Tampers. Most are 3 inches tall... All tamp metal tamp heads are 5/16" $20 shipped or trade... to the lower 48 pm for details on other locations... If you would like me to create a new one contact me... I also create Cigar Draw Tools... Contact me if you have...
  9. Retailer/For Profit Sales Forum
    $25 ea. shipped your choice.... I take PP....pls use gift option If you would like me to create a new one contact me... I also create Pipe Tampers... or list of wants... Tatauje... rares are a plus... My Father Opus Padron Ann VSG Cabiguan Guapos Illusione LaRiqueza El Triunfador Cruzado...
  10. Retailer/For Profit Sales Forum
    Here is my latest round of Pipe Tampers. Most are 3 inches tall... All tamp heads are 5/16" Tamp heads are available in the following metals - Chrome, Gold, Copper or Gunmetal. $20 shipped or trade... to the lower 48 pm for details on other locations... Contact me if you have any questions. I...
  11. Want to Sell/Trade (WTS)
    Gran Habano 2 (GH2) from fss: 7x48 ... $1.25 El Mejor Espresso: 5x50 ... $2 Isla del Sol by Drew Estate: 7x50 ... $2.25 Superior from La Aurora: 7x50 ... $2.00 Padilla Obsidians: 6x54 ... $2.25 La Vieja Habana (Cuban Corojo) by Drew Estate: 6x54 ... $1.75 La Flor de J. Cano: 6x52 ... $1.75...
  12. WTS/B/T Pipe Stuff
    Hey guys. It came to the point where I'm looking to really get into pipes. I can either sell these pens or trade them. I have a very large wish list so here goes. -Lepeltier pipe (any one I don't care I just really want a lepeltier) -Boswell blends. I have had xmas cookie, berry cobler, and...
  13. Retailer/For Profit Sales Forum
    Here we are again, this time I have a new tip designed to ream a plugged stick better than before. I have cut 2 fluted section to better ream. (see pic below) As you all may have seen my Cigar Draw Tools and Pipe Tampers, I also sell Fine Handcrafted Pens. Here is a sample of what I have to...
  14. Want to Sell/Trade (WTS)
    Below is the list of Gurkhas I am offering. The usual story, my tastes have changed and I need the room in the humidors. 20 cigars in total. I will try post pictures later, my camera battery decided to die on me. Asking price is $75 (includes CONUS shipping and pp fees). Thanks for looking. I...
  15. WTS/B/T Pipe Stuff
    I'm looking to sell my Savinelli Alligator. It has been smoked maybe 6 times total, english blends that are light on latakia for the most part. It is a very solid pipe with a great draw, the bowl is just too big for my tastes. I'm looking to trade it for another pipe, or to sell it. I'd be...
  16. WTS/B/T Pipe Stuff
    I've got a Bjarne freehand I'm looking to possibly trade or sell. I was told it was carved in the 70's, of course I have no way of proving this, but it is obviously an older pipe. If I sell it, i'll be asking for atleast $140, or best offer. Or if you don't want to spend that much on it, show...
  17. Retailer/For Profit Sales Forum
    I am selling these Handcrafted Draw Tools to raise funds for a new Vinotemp. I have out grown my humidors and the Heat is coming so It's time to care for my babies.... As you all may have seen my Cigar Draw Tools and Pipe Tampers, I also sell Fine Handcrafted Pens. Here is a sample of what I...
  18. Gamers Forum
    I have one of the older big PS2 with the HD Loader disk and 80gb HD loaded with 12-13 games. I would like to Sale it for $100 Shipped or equal Value in stix, cutter or Evertorch lighter(s). The Newer DVD7 games cannot be loaded to the HD Loader but for some of the older games its a great way...
  19. Retailer/For Profit Sales Forum
    Ok guys I wanted to try something a little different. I decided to put some of you favorite bands on these. I have left them with more of a satin finish to resemble a cigar. Also the shape is similar as well. One even is spot on to a Firecraker....:D either for sale or trade....$25 shipped or...
1-19 of 47 Results
Top