Search Results for ‘setup’

Just bought a 45 quart cooler and I'm currently getting it set up. Put an unused spanish cedar cigar tray in the bottom, with 2 knee high panty hose on each side filled with kitty litter. Still going to wait a day or so to make sure, but it looks to be holding pretty steady at 67% at the...

From the dry cigars on the bottom thread I got a little freaked out about my coolerdor. It holds the RH well and all but I just wanted to make super sure that my humidification was even. So now I have a drymist tube in both of the closed boxes I have in there. Along with this I have 2 boveda...

Well I am thinking I want to get into home brewing but I don't know where to being looking for a good beginner setup. I am looking to invest less than $100 if possible as I do not know if I will enjoy the hobby or not until I try. Are there any suggestions from you current home brew experts...

Just got done loading up my new Vinotemp 28. The beautiful drawers are thanks to Forrest. I am so in love with this new setup I could just spit. Hope you enjoy the pics!.....:eyebrows:

i started out with water beads but reading posts and threads i decided to pick up some KL and to start with and get a baseline I used 1/2 lb of KL and sprayed it enough to dampen it but not drench it just to see what the RH gets to then i'll go from there

Just got my shelves in and love the way it looks. I was going to go the wineador way, but warranty on them scared me away. Read too many reviews on em and it was not worth investing money in a wine cooler and then getting shelves made only to have the wineador go out on me. One year warranty...

This is my new fan set-up for my next winodor. I am going to install it along the back side of the fridge instead of the side. I figure that since the shelves and drawers do not extend completley to the rear, it will circulate the air more. I am also going to install 2 smaller fans in the top...

After a lot of trial and error over the last two weeks or so, the wineador is finally starting to fully stabilize in RH. The RH range, top to bottom, is between 63-67%, with an average temperature of 66F. Here are a few pics. The bottom tray is all KL, the second tray is CAO Brazilia GOL...

Here is some pics of my winecooler winehumidor. Just got it so waiting it for geting a stable humidity. Going to lay out some pictures after some days when I got some cigars inn it. And also some pictures of my stash :)

I figured i would throw a few pics up of my vinotemp setup finished and filled. I wouldnt have been able to do it without you guys. Let this be a reminder to noobs to always go MUCH bigger than you think you will ever need. I am only about 2 years down the slope and i seem to be sliding faster...

Hello all, Having recently decided to improve my daily cup of coffee I've done some research and come up with this set up: Frieling USA Ultimo Stainless-Steel French Press, 35-ounce Baratza 585 Virtuoso Coffee Grinder Hearthware i-Roast 2 Coffee Roaster Any opinions on this setup? Also what...

$4 container from Walmart One mesh baggie and one chunk of cedar inside, both my tupperware containers are like this Also use one mesh baggie in both of my 20-count humidors My standup humi just to give you an idea of the three trays (with awesome Tritones ashtray on top!) With bottom...

well i guess the mom and girlfriend have noticed a pattern in my hobbies.. how can a man complain.. just finished seasoning... so gonna load them up in a couple days.. rb

Most of the fan systems I've seen inside humidors are for those that can store 300+ with multiple levels and compartments. Well, I don't have one of those as mine can only hold 100 cigars. But darn it, I still want to be able to circulate the air to keep a constant humidity level all throughout...

I looked around a bit and didn't see a specific answer, so I thought I'd make a new post. If one is going to add fans to a Vino, would you put them at the top (blowing down) or at the bottom (blowing up). Or would it matter? Im thinking that charging the beads on the bottom (and redirecting...

I just finished setting up my existing floor model humidor. I used 2 - 12V CPU fans from Radio Shack and a selectable power source (3-12V) which allows me to vary the fan speed. I have 1-1/2 lbs of beads; broken up into multiple dishes on various levels. The top shelves currently have my singles...

Hello all, I have hit the slope and now i need to expand my storage capacity!! I purchased a 33qt coleman cooler last week and some spanish cedar plank and ordered some beads from heartfelt. Now i need to decide a few things before i get started... Am I covering the inside of the cooler...

the guy sold me everything i needed at the local shop! i see videos saying wipe it with water and some saying dont!

Hey folks! I'm a new member, but I've been lurking around for some time. I am a casual smoker trying to get more into the hobby. I am a college student in Wilmore, KY which makes things a little tougher with the finances, but I finally broke down and got my first humidor!!! :) It has a 40...

OK, I just set up my new humidor, and I have a question about how I place my humidification devices - in this case containers of gel. My questions are, are there enough gel containers? And, are they placed in the best places. On the tray, I have a tube on each side. In the bottom I have a...